Used Paper Counter - Search Result - Page 1 
Offset Press 1995 Heidelberg Speedmaster SM 52-6, Perfector: Yes, Perfector Location: Between 1 & 2 and 2 & 3, S/N: 200061, Imp. circa: 248000000, Paper size: 370 x 520 mm, Features: 15000 sph, Alcolor Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CPC 1.04, CPTronic, Diagonal Register, Double sheet detector, Grafix powder spray, Low pile delivery, Non-stop delivery, Non-stop feeder, Preset, Preset Feeder, Stream Feeder, Suction Tape on Feeder, Technotrans Refrigerated Recirculator.
Offset Press 1994 Roland R706 + L, S/N: 24565 B 07599, Imp. circa: 250000000, Paper size: 720 x 1020 mm, Features: 15000 sph, Air drums, Auto ink roller wash, CCI (Computer Controlled Inking), CPL (Semi-auto plate loading), Chrome impression cylinder, Diagonal Register, Double sheet detector, Electronic sidelay control, Extended delivery, High pile delivery, IR Dryer, In line coater, Lateral and circumferential register control, Non-stop delivery, Non-stop feeder, Pin register on clamps, Powder Spray, RCI (Remote Controlled Inking), Rolandmatic, Sheet decurler, Steel plate in feeder & delivery, Stream feeder, Vacuum feed board.
Offset Press 2000 Heidelberg Speedmaster SM 52-5 + LX, S/N: 203538, Imp. circa: 85000000, Paper size: 370 x 520 mm, Features: 15000 sph, Alcolor Dampening, Alcolor Vario Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CPC 1.04, CPTronic, Diagonal Register, Double sheet detector, Extended delivery, Grafix powder spray, Heidelberg DryStar IR Dryer, Hot air knife, In-line coater, Light pen & smart card reader, Non-stop delivery, Non-stop feeder, Preset, Sheet Decurler, Straight Machine, Stream Feeder, Suction Tape on Feeder, Technotrans Refrigerated Recirculator.
Offset Press 2006 Heidelberg Printmaster PM 52-4, Perfector: Yes, Perfector Location: Between 2 & 3, S/N: Pending, Paper size: 370 x 520 mm, Features: 13000 sph, Alcolor Dampening, Automatic Blanket and Roller Washer, Bacher pin register on clamps, Baldwin Refrigerated Recirculator, CPTronic, Chain delivery, Classic center, Diagonal Register, Double sheet detector, Easy Plate, Electronic sidelay control, Like new condition, Low pile delivery, Mediprint Spray Powder Unit, Preset Feeder, Sheet Decurler, Stream Feeder, Suction Tape on Feeder, Technotrans Refrigerated Recirculator.
Offset Press 2008 Heidelberg Speedmaster SM 52-4 + LX, S/N: 208218, Imp. circa: 44000000, Paper size: 370 x 520 mm, Features: 15000 sph, Alcolor Dampening, Alcolor Vario Dampening, Automatic Blanket Roller and Impression Cylinder Wash, Autoplate, Bacher pin register on clamps, CP2000, Chain delivery, Chromed plate cylinders, Diagonal Register, Double sheet detector, Electronic sidelay control, Extended delivery, Grafix IR Dryer, Grafix powder spray, High pile delivery, In-line coater, Ink Line, Ink temperature control, Instant Gate, Like new condition, Non-stop delivery, Preset, Preset Feeder, Sheet Decurler, Silver Series Machine, Straight Machine, Stream Feeder, Suction Tape on Feeder, Technotrans Refrigerated Recirculator, Ultrasonic double sheet detector.
Offset Press 2002 Roland R904 7B, S/N: 29573B, Imp. circa: 239000000, Paper size: 1200 x 1620 mm, Features: 13000 sph, Air drums, Air suction in feeder, Auto blanket wash, Auto ink roller wash, Blanket size: 52.323" x 65.354", CCI (Computer Controlled Inking), Central Air Cabinet, Chrome blanket cylinder, Chrome impression cylinder, ColorPilot Smart (RCI + CCI), Delivery pile height: 46.85", Diagonal Register, Double sheet detector, Electronic sidelay control, Feeder pile height: 47.25", High pile delivery, Job memory card, Lateral and circumferential register control, Mabeg feeder, Max. delivery pile weight: 3000kg, Max. feeder pile weight: 3000kg, Max. image area: 46.850" x 63.779", Max. sheet size: 47.244" x 63.779", Min. sheet size: 23.622" x 36.220", PPL (Power Plate Loading), Paper Thickness: 0.00236" - 0.0157", Pecom, Pin register on clamps, Plate size: 52.165" x 64.173", Pneumatic sidelay, Powder Spray, Premium Size Changing, RCI 2 console with touch screen monitor, Rietschle Aircenter, Roland Delta Dampening, Sheet decurler, Start of print: 2.95", Steel plate in feeder & delivery, Stream feeder, Technotrans Recirculator Refrigerator, Technotrans ink temperature control, Vacuum feed board, Weight: 90 Ton.
Offset Press 1994 Heidelberg MOZ, Perfector: Yes, Perfector Location: Between 1 & 2, S/N: 613817, Imp. circa: 44000000, Paper size: 480 x 650 mm, Features: 11000 sph, Alcolor Dampening, Automatic Blanket Wash, Bacher pin register on clamps, CPTronic, Chain delivery, Double sheet detector, Electronic sidelay control, Equipment located in Colombia, IR Dryer, Low pile delivery, PowderStar spray unit, Preset, Quick action plate clamps, Royse Refrigerated Recirculator, Sheet Decurler, Stream Feeder, Ultrasonic double sheet detector.
Drill 2000 Challenge Century, S/N: 64345, Paper size: 280 x 440 mm, Features: Floor model, Motorized head, One head, Semiautomatic.
Folder 2005 Baum 714, S/N: 86-D-211, Paper size: 360 x 520 mm, Features: Air feed, Quick set, Table top, Two plates.
Folder 1992 MBO T-49 / 4, S/N: P2/08, Paper size: 520 x 840 mm, Features: 1st Unit - 4 plate folds, Air feed, Belt delivery, Combo rollers, Control box, Counter, Pile feeder, Quick Set.
Folder 2008 Stahl B-23 / 44, S/N: 123RI0007, Paper size: 580 x 940 mm, Features: 1 right angle, 1st Unit - 4 plate folds, 2nd Unit - 4 Plate folds, Air feed, Belt delivery, Combo rollers, Continuous feeder, Counter, Parallel Section, Pre-slitter shaft, Quick Set, Slit/Score/Perforate in parallel section, Zero Speed Folding Plate Deflectors.
Folder 1995 Stahl T-36 / 44, S/N: 81395-236066, Paper size: 360 x 540 mm, Features: 1st Unit - 4 plate folds, Air feed, Belt delivery, Combo rollers, Continuous feeder, Counter, Miniature Stacker, Pile feeder, Quick Set.
Paper Cutter 1973 Polar 115 CE, S/N: 4331933, Paper size: 1150 x 1150 mm, Features: Air table, Automatic, Digital programming, Safety lights, Side tables, Spare blades.
Paper Cutter 2001 Saber S115, S/N: 61601, Paper size: 1150 x 1150mm, Features: Automatic, Floor Stand, Safety lights.
Die Cutter 1979 Gietz FSA 720, S/N: 11406, Paper size: 520 x 720 mm, Features: Dimensions: 4.3 x 3.6 x 1.9 m, Feeding Pile Height: 950mm, Foil Stamping, Foil feeding units: 3, Max. Paper Thickness: 0.5mm, Max. Sheet Size: 720 x 520 mm, Max. Speed: 5000 sph , Maximum foil diameter: 160mm 1" core, Min. Paper size: 297 x 210mm, Programmable foil advance, Total Power: 34kw, Total Weight: 7.0 Tons .
Die Cutter 1959 Heidelberg S, S/N: 13193, Paper size: 520 x 720 mm, Features: 4000 strokes per hour, Max. Blank Size: 21.25" x 28.5", Min. Sheet size: 4.5 x 6.25", Weight: 10350 lbs..
Die Cutter 1958 Heidelberg S, S/N: 12562, Paper size: 520 x 720 mm, Features: 4000 strokes per hour, Max. Blank Size: 21.25" x 28.5", Min. Sheet size: 4.5 x 6.25", Weight: 10350 lbs..
Die Cutter 2024 Royo Machinery ML2500, S/N: Pending, Paper size: 2500 x 1500 mm, Features: 5mm steel plate, Air clutch, Air pressure: 7 bar - 0.3 m3/min, CE Standard Machine, Central lubrication with auto pump , Corrugated board up to 8.5mm, Cycle control: Single cut and stop at the open position - time delay open position - continuous cycle, Dimensions: 142" x 88.5" x 98.5", Dust cover curtain, Gantry for chase removal, Hand Feed, IR safety lights, Inner chase size: 98.5" x 59", Max. Speed: 12 +/-2 strokes per minute, Max. die cutting length: 2756", Micro adjustment device, Paper or cardboard thickness: 100-2000 gsm, Pneumatic die plate ejector, Suggested HS code: 8443.19.8000 (Manual), Total Power: 22kw, Total Weight: 18.5 Tons, Triple electromechanical safety device, Voltage: 220V 3PH 60Hz.
Die Cutter 2024 Royo Machinery ML750, S/N: Pending, Paper size: 530 x 750 mm, Features: Central lubrication with auto pump , Dimensions: 1650 x 1400 x 1500 mm , Hand Feed, Max. Speed: 1500 strokes per hour, Max. die cutting length: 1500 mm, Max. die cutting size: 750 x 520mm, Paper or cardboard thickness: 100-2000 gsm, Suitable paper 1-8 mm corrugated paper (including laminated), Total Power: 2.2kw, Total Weight: 2.2 Tons , Voltage: 220V 3PH 60Hz.
Oriental Machinery is one of the world's most experienced suppliers of new and used printing, finishing and carton converting equipment worldwide. We have sold more new and used printing and finishing equipment to the Caribbean and Latin American printers than any other company over the last 72 years. Our exceptional relationship and understanding of the region gives our company a competitive edge over competitors.
The Royo Family and its Asian team have accumulated the expertise to help you with the logistics and the engineering required to manage the process of buying and selling packaging, carton and converting machinery from Asia anywhere in the world. We offer additional services such as pre-purchase inspections, dismantling and removal, parts, cleaning and painting, rebuilding and retrofitting, transportation, installation and demonstration, after sales service and warranty, appraisals and professional consultation.
Being in the industry since 1948 has allowed us to build a global network dedicated to finding the new or used printing, finishing and packaging and carton converting equipment you might be looking for at the most competitive prices. Let us help you find the Die Cutter, Box Folder Gluer, UV Coater, RollSheeter, Paper Cup Making Machine or any other machine you are looking for.
